Fevicol HEATX Heatproof Adhesive – Powerful High-Temperature Bonding

Choose Fevicol HEATX Heatproof Adhesive for demanding furniture, woodworking and laminate bonding applications. This synthetic rubber-based contact adhesive is specially formulated to provide strong initial bonding and heat resistance up to 170°C. It is designed for lamination work where reliable adhesion and resistance to heat exposure are important.

Supplied in a 650 ml container, Fevicol HEATX is suitable for professional carpenters, furniture manufacturers, interior fit-out teams and other users involved in woodworking and laminate installation.

Heat Resistance Up to 170°C

One of the key features of Fevicol HEATX Heatproof Adhesive is its resistance to temperatures up to 170°C. This makes it suitable for selected lamination applications in areas exposed to higher temperatures, such as kitchen furniture and worktops.

The heat-resistant formulation helps maintain the bond under suitable operating conditions. Always follow the manufacturer’s application instructions and consider the temperature exposure of the complete installation, including the bonded materials.

Strong Initial Grab and Quick Bonding

Fevicol HEATX is designed to develop a strong initial grip after application. Its quick bonding performance helps reduce waiting time during suitable lamination work.

The manufacturer describes a bonding time of approximately 10–15 minutes. Actual application and drying conditions can vary with temperature, humidity, surface type and the amount of adhesive applied.

Helps Resist Laminate Spring-Back

When laminates are applied to curved or contoured furniture surfaces, they can exert a spring-back force. Fevicol HEATX is formulated to provide a strong initial grab that helps resist this effect.

This makes the adhesive particularly useful for selected curved, vertical and other challenging lamination applications where maintaining proper contact is important.

Suitable for Laminate and Woodworking Applications

Fevicol HEATX is designed for furniture and lamination work. The manufacturer’s product information identifies applications such as:

• Bonding laminate to wood and plywood
• Selected PVC laminate-to-laminate applications
• Kitchen furniture and laminate work
• Vertical and curved furniture lamination
• Selected furniture surfaces exposed to heat

The suitability of the adhesive depends on the materials, surface preparation and application conditions. Always test compatibility on the intended materials before starting a full project.

Application Instructions

For a reliable bond, correct surface preparation and application are important. Follow the instructions printed on the product container:

1. Prepare the surfaces: Ensure the surfaces to be bonded are dry, clean and free from oil, grease and dust.
2. Stir the adhesive: Stir the adhesive inside its container for a few seconds before application.
3. Apply the adhesive: Apply it first to the non-porous surface and then to the porous surface, using a suitable notched spreader.
4. Allow drying: Allow approximately 8–12 minutes for the adhesive to dry, depending on temperature and humidity, and ensure the surfaces reach the required touch-dry condition.
5. Align carefully: Position the materials correctly before bringing the surfaces together.
6. Apply firm pressure: Apply strong, uniform pressure using a cloth-wrapped wooden plank or another suitable method recommended for the job.

For vertical applications, the container instructions specify keeping a 2 mm gap between adjacent laminates and limiting the width of each laminate to a maximum of 61 cm. Follow the full instructions on the actual container for the specific installation.

Important Safety and Handling Information

Fevicol HEATX is a solvent-based synthetic rubber adhesive. Use it in a well-ventilated working area and avoid breathing its vapours. Keep the adhesive away from flames, sparks, heat sources and smoking materials during storage and application. Keep the container closed when not in use and out of reach of children.

Heat resistance of the finished bond does not mean the adhesive is safe to apply near an ignition source. Read the product label and manufacturer’s safety information before use.

Fevicol HEATX Product Details

• Brand: Fevicol
• Product: HEATX Heatproof Adhesive
• Product Type: Synthetic Rubber Contact Adhesive
• Net Quantity: 650 ml
• Heat Resistance: Up to 170°C
• Bonding Type: Contact adhesive
• Main Application: Laminate and woodworking
• Suitable Applications: Selected wood, plywood and laminate bonding
• Brand Origin: India
• Country of Manufacture: India
• EGEEN SKU: EG2398
• Product Reference: 15991

Buy Fevicol HEATX Heatproof Adhesive from EGEEN UAE

Looking for a heat-resistant adhesive for furniture and laminate work? Fevicol HEATX Heatproof Adhesive offers strong initial grab, quick bonding performance and heat resistance up to 170°C for suitable applications.

Explore more products at EGEEN and discover practical solutions for home improvement, furniture work and professional projects. Visit EGEEN About Us to learn more about our business.

Choose Fevicol HEATX 650 ml for your next suitable lamination or woodworking project.